|
E-Z Patterns
A way to make pattern layout , cutting and grinding easy.
Peel and stick patterns.
It's as easy as clean the glass, peel the pattern, apply it to the glass, cut and grind!
Remove the pattern, re- wash the glass, and you have one of the best fitting projects
possible.
Custom made or from an existing pattern.
This is what you will receive. A peel and stick pattern and a layout sheet to build your project
on.
STEP 1. CLEAN AND DRY YOUR GLASS. THIS IS VERY IMPORTANT
TO ASSURE THE PATTERN WILL STICK.
STEP 2. MARK YOUR PATTERN (OPTIONAL). IF YOU WANT THE PATTERN IN THE GLASS TO FLOW A CERTAIN WAY,
NOW IS THE TIME TO MARK IT SO CAN BE PLACE THE RIGHT DIRECTION ON THE GLASS. NOW ALSO WOULD BE A GOOD TIME TO NUMBER IT IF
YOU LIKE. A SHARPIE WORKS GREAT FOR THIS.
STEP 3. PEEL E-Z PATTERN FROM THE BACKING.
STEP 4. LAY E-Z PATTERN ON THE GLASS AND RUB THE EDGES WITH YOUR FINGER
TO MAKE SURE IT IS STUCK TO THE GLASS.
STEP 5. YOUR READY TO CUT.
STEP 6. CUT AS CLOSE TO THE LINE AS POSSIBLE.
WITH E-Z PATTERNS, GRIND TIME IS REDUCED!
STEP 7. GRIND RIGHT UP TO E-Z PATTERN
TEST FIT IS NO PROBLEM!
STEP 8. REMOVE THE E-Z PATTERN AND RE-WASH THE GLASS, SO FOIL WILL HAVE
A CLEAN SURFACE TO STICK TO.
STEP 9. YOUR READY TO FOIL.
STEP 10. YOUR STAIN GLASS PROJECT IS READY TO SOLDER. WITH E-Z PATTERNS,
THERE ARE NO BIG GAPS TO FILL.
|
